This feature is available for Standard and
Premium accounts only.
| Field | Description |
| Inbound Forwarding Rule | |
| Name | Enter a name for the rule. |
| Description | Enter a rule description. Optional. |
| External WAN Port(s) | Select a port. |
| Destination LAN Port(s) | Enter the destination LAN port that applies to this rule. If there is a range of ports, the ending port is automatically set. |
| Destination LAN IP | Enter the destination LAN IP address that applies to this rule. |
| Protocol | Select the protocol of the messages that apply to this rule. Options are: TCP/UDP, TCP, UDP, or ANY. |
| Inbound Filter Rule | |
| External Source IP | Enter the source IP address that applies to this rule |
| External Source Ports | Enter the source port range that applies to this rule. |
| Mask | Enter source subnet mask that applies to this rule. |
| Enable NAT Loopback | Check if you want to redirect LAN packets destined for the WAN's public IP address. |